Oil storage tank infiltration method: This is a typical lubrication approach, specifically suitable for low to medium-speed operating environments. The self-aligning sphere bearing is partly submersed in lubricating oil. When the part rotates, the lubricating oil is picked up and afterwards flows back into the oil sump. The oil level should be slightly less than the center of all-time low of the ball to make sure optimal lubrication.
Oil leaking approach: For birthing parts that need specific quantities of lubricating oil, the oil trickling approach is an excellent selection. The frequency of oil dripping is usually controlled to one decrease every 3 to 8 secs. Excessive lubricating oil may cause the bearing temperature level to increase.
(bearings lubrication)
Circulation approach: This method utilizes an oil pump to carry filtered lubricating oil to the bearing parts. The lubricating oil, after going through the bearing, is filteringed system and cooled down prior to reuse. Since distributing oil can effectively get rid of warmth, this approach is especially ideal for high-speed bearing elements.
Spray technique: Mix dry pressed air and lubricating oil through a sprayer to create an oil haze and spray it onto the bearing. This technique can not only effectively reduce the bearing temperature yet likewise prevent the intrusion of contaminations. It is especially ideal for birthing lubrication in high-speed and high-temperature environments.
Shot method: Make use of an oil pump to inject high-pressure lubricating oil straight onto the bearing via a nozzle, and afterwards the lubricating oil moves right into the oil groove from the other end of the bearing. When the bearing rotates at high speed, the high-speed rotation of its rolling aspects and cage will create air movement. This method can properly utilize this airflow for lubrication.
Supplier
Infomak is dedicated to the technology development of special oil additives, combined the Technology of nanomaterials developed dry lubricant and oil additives two series. It accepts payment via Credit Card, T/T, West Union and Paypal. Infomak will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you are looking for high-quality pour point depressant, please feel free to contact us and send an inquiry.
Inquiry us